29
PROgRAMMINg
Figure 22
Zone Setup Keypad Tab
Whole House/Mute
6. Left click the
Whole House/Mute Tab
to confirm Whole House and Mute Key
Functionality. These functions should have already been configured in the existing
project. Under
Whole House/Party Mode,
“This Zone Initiates” should be checked to
enable Party Mode from a press and hold of the
Click Button
when selecting a source
on the Source Keypad. “This Zone Ignores...” should be checked to lock out Party Mode
commands from other zones. Under
Mute Key Functionality,
“Internal Preamp Muting”
should be checked to use the M4 or M6 zone
preamp muting
function. “PMK Relay
Speaker Muting” should be checked when using a
Speaker Mute Relay
for muting
individual rooms in sub-zone expansion applications (multiple rooms in a single zone).
When
Zone Whole House/Mute
functions are set, left click
Apply
. (Refer to
Figure 23
)
Figure 23
Zone Setup Whole House/Mute Tab
Keypad Address
7. Any keypad whether an PMK or Source must have its
Address
configured in
Proficient
Editor
. If there is only one keypad per zone, all keypads can be set to the
same Address
.
