4 English
8. RECOGNISING AND REPAIRING OF MISTAKES
9. NOTES ON PRODUCT LIABILITY
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if
no changes were made to the equipment. If repairs are carried out by our authorized service, we are only liable if
original spare parts and accessories were used.
10. NOTES ON DISPOSAL
Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to
be disposed in your household garbage. We are registered at the German registration department EAR
under the
WEEE-No. DE25523173.
This symbol means, that you’re not allowed to treat this product as a
regular household waste item – it has to be disposed at a recycling collection point of electrical devices.
This is the best way to save and protect our earth.
THANK YOU FOR YOUR SUPPORT!
11. EU DECLARATION OF CONFORMITY
The undersigned 1A Profi Handels GmbH, Budenheimer Weg 55, 55262 Ingelheim am Rhein confirms, that the
products placed on the market execution referred to the relevant regulations below, the relevant EU directives and
harmonized corresponds to the EU standard for security.
This declaration is valid insofar as no changes to the product are made.
Authorized person to keep the technical documents:
1A-Profi-Handels GmbH · Budenheimer Weg 55 · D-55262 Ingelheim am Rhein
Low Voltage Directive (2014/35/EU)
Machinery Directive (2006/42/EC)
Electromagnetic compatibility directive (2014/30/EU)
The following harmonized standards:
EN ISO 12100:2010, EN 809:1998+A1:2009+AC:2010, EN 60204-1:2006+A1:2009+AC:2010,
EN 60335-1:2012+A13:2017, EN 60335-2-41:2003+A1:2004+A2:2010, EN 62233:2008+AC:2008,
EN 60034-1:2010+AC:2010, EN 55014-1:2017, EN 55014-2:2015, EN 61000-3-2:2014, EN 61000-3-3:2013
Wiesbaden, 1st March 2021
Peter Neumüller
Problem
Possible cause
Solution
Pump runs, no water is being
pumped
Air in the suction line
Check suction line and connections
for vacuum tightness
Air in the system (cannot escape)
Air in the system must be let out
Impeller wheel is blocked
Impeller wheel must be cleaned
Pump does not start or switches
itself off
Engine guard has switched the
pump off
Pump needs to be cooled
No electricity
Check electrical connections
Pump runs, Pump capacity slows
down or stops
Pump is inserted to deep
Insert pump not so deep
Hose connections systems have
a leak
Check hose connection systems
Impeller wheel is worn down
Change impeller wheel
Filter has become dirty
Clean filter
