15
GB
GB
14
axhess GmbH & Co. KG, Industriestrasse 11, 56598 Rheinbrohl, www.axhess.de
6 Care and cleaning
Periodically check the technical safety of the transducer, e.g.
Damage to power cord or cabinet. Before cleaning the appliance, make sure
that the appliance is not connected to a power source.
Always wipe the unit with a dry cloth. Do not use liquids or chemical cleaners.
Never immerse the appliance in liquids. Never allow liquids to run over the unit.
7 Troubleshooting
With this converter you have purchased a product, which was built according
to the state of the art and operationally safe. However, problems or disturban-
ces may occur.
Therefore, we would like to describe how you can solve possible problems:
8 Warranty
We refer to our warranty conditions, this can be found at www.axhess.de
warranty conditions. The warranty period is 24 months from the date of
purchase.
This converter works fully automatically and can also be switched on and off
for an extended period of time. Connected to a 12V DC connector when the
device is connected to a 24V power supply.
It has protective mechanisms:
Overload protection
The device switches off automatically when the max. Connection load is per-
manently exceeded.hort circuit protection.
The converter is protected against short circuit. Turns on again as soon as the
short circuit is removed.
Short circuit protection
The converter is protected against short circuit. Turns on again as soon as the
short circuit is removed.
4 Equipment features
1. Housing made of fire-retardant plastic
2. 12V connection devices up to 10A / 120W
Power consumption can be operated.
3. LED indicator Power ON,
4. Short circuit protection.
5. Convenient 12V socket for holding 12V connector.
6. Overload protection
5 Connection / operation in single steps:
Das Gerät so platzieren, dass es nicht umfallen oder stürzen kann.
Status:
details:
Place the device so that
it can not fall or fall.
Connect to 12V power source Connect the plug of
the unit to a 24V socket. Ro LED Power ON is on.
Connect to the 12V
connector
The 24V connector of the 12V connector to the
12V socket of the Converter,
Troubleshooting
solution
No function
Is the connector connected to the 12V power source.
- Is the power source activated
- Check the power source
Any other measures than described above must be carried out by an
authorized specialist.
