Profi Care PC-LR 3083, Instruction Manual

Page: 48 / 86

PC-LR3083_IM_new2_14.01.2021 14.01.21
48
Remote Control
The range of the remote control is limited.
When using the remote control, please ensure that there
are no obstacles placed between it and the sensor on the
appliance.
1.
Open the battery compartment cover on the back of the
remote control.
2. Insert 2 batteries of type R03 “AAA” 1.5 V, observing
the correct polarity (see markings on the bottom of the
compartment)!
3. Close the battery compartment cover.
Notes for Use
• The air purifier is not a substitute for medical treatment
required when facing pre-existing allergic conditions. If
you are not sure, always consult your doctor.
• By the use of the special filter system, the air purifier
removes harmful spores causing the formation of mould
from the ambient air. Thus, both the risk of mould
spreading and health-related issues is reduced.
NOTE:
In case mould is already present in the room, it cannot
be removed anymore just using the air purifier.
• Unpleasant odours are removed.
Location
• A skid-proof, even surface is suitable as installation loca -
tion. The appliance operates more effectively, if you keep
the windows and doors closed during operation.
• Maintain the following safety distances:
- 30 cm all around
- 120 cm to the ceiling
NOTE:
Do not forget to air on a regular basis.
Filter Element
Your appliance features a 4-filter system, consisting of the
following filter stages:
• Pre-filter , retains coarse particles
• HEPA filter , retains fine dust particles, pollen etc.
• Activated carbon filter that, among other things, can
remove odours
• Catalysis filter that neutralizes harmful environmental
gases.
For more information about the filter element, see “Clean -
ing / Maintenance”.
Electrical Connection
1. Connect the power adapter with the connecting socket of
the appliance.
2. Plug the power adapter into wall outlet. You will hear a
beep sound and all indicator lamps light up briefly. Addi -
tionally, the ring lights up. The appliance will then enter
standby mode. The value PM2.5 is displayed.
Operating Buttons
The buttons on the appliance are sensor touch buttons. In
order to perform the corresponding function gently touch the
buttons. Whenever a button is pressed, it will be confirmed
by a beep sound.
Control
Panel
Remote
Control
Function
ON / OFF On / off
SPEED SPEED
Power level selection
( , , , and Auto)
—
Wi-Fi connection is
activated
CHILD LOCK 3s Child lock
TIMER ON TIME
Time-delayed switch on:
to
TIMER OFF TIME
Time-delayed switch-off:
to
FILTER
REPLACE
— Filter reset
ANION ANION Ionizing function
SLEEP SLEEP
Sleep mode /
power saving mode
APD Sensor
( A ir P ollution D etection)
The appliance is equipped with an APD sensor that is moni -
toring the air quality. It indicates the air quality as follows:
PM2.5
*1
value in
the display
Colour Evaluation
1 to 75 green good
75 to 150 yellow satisfactory
150 to 300 red poor
H (>300) red poor
*1
PM2.5 is the threshold for fine dust. These microscopic
particles, with a size of up to 2.5 microns, naturally float
in the ambient air. Depending on conditions such as the
condition of the room, the sensor and filter status and
other environmental influences etc., this limit can vary.