11
GUARANTEE
Please observe the enclosed terms of guarantee.
Malfunction
Motor does not start up
Motor hums but does not start up
Machine starts up, but becomes blocked at
low load and may switch off automatically
Possible cause
→ no mains voltage
→ defective cable
→ thermostat is triggered → reason:
- motor overload
- motor not getting enough air owing to
clogged ventilation apertures
→ blocked crown gear
→ defective condenser
→ extension cord is too long or its cross-
section is too small
→ socket is too far from mains connection
and the connecting wire’s cross section is
too small
Remedy
→ check fuse protection
→ have checked or replaced (electrician)
→ allow motor to cool and then find and
eliminate whatever caused the thermostat
to respond
→ switch off machine, pull plug and clean or
replace the crown gear segments
→ send machine to manufacturer or a
company designated by the manufacturer
for repairs
→ extension cord must be at least 1.5 mm²
for a maximum length of 25 m; the cross-
section of longer cables must be at least
2.5 mm²
EQUIPMENT FAILURES
PROF_IM_502228971.indd 11
PROF_IM_502228971.indd 11
14.2.2022 16.28.20
14.2.2022 16.28.20
Summary of Contents for 502228971
Page 49: ...49 PROF_IM_502228971 indd 49 PROF_IM_502228971 indd 49 14 2 2022 16 28 36 14 2 2022 16 28 36...
Page 50: ...50 PROF_IM_502228971 indd 50 PROF_IM_502228971 indd 50 14 2 2022 16 28 36 14 2 2022 16 28 36...
Page 51: ...51 PROF_IM_502228971 indd 51 PROF_IM_502228971 indd 51 14 2 2022 16 28 36 14 2 2022 16 28 36...