13
using more than one subwoofer, probably you have a subwoofer inverted respect the other. Be always sure all these
switches are in same position.
12. ON indicator
GREEN LED: when lighted indicates amplifi er has been turned on and AC power is available.
13. POWER switch
Speaker is "ON" when the switch is in the "I" position. Use this switch to set the speaker power to ON or OFF.
NOTE: When you shut down your equipment, turn off the speaker fi rst.When powering up, turn on the speaker last.
14. AC~ socket
Here’s where you plug in your speaker’s mains supply cord. You should always use the mains cord supplied with the
speaker. Be sure your speaker is turned off before you plug the mains supply cord into an electrical outlet.
15. FUSE holder
Here is placed the mains protection fuse.
Please follow the instructions on page 10 of this manual to replace it.
16. LINE VOLTAGE selector
This selector set the AC voltage line of your country (usually it is set by factory and isn't necessary to change). The 120V
setting is for mains line in the range of 105-120V~ and 240V setting is for mains line in the range of 210-240V~.
WARNING:
an incorrect setting of AC LINE VOLTAGE could damage seriuosly the internal amplifi er!
17. POWER OUT AC~ socket
Here’s where you plug in your satellite speaker’s mains supply cord. Connecting the satellite speaker to this socket you
can switch on/off the whole system from the SW110A power switch.
WARNING:
the maximum load for each socket is 4 amperes, the SW110A amplifi er and both the power out sockets
are protected by the fuse.
english
