PROEL Gator, User Manual

Page: 13 / 24

gator Manuale d’uso – User’s manual
13
SAFETY INSTRUCTIONS
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN
WARNING: TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
In order to avoid damage to unit hardware and electronic parts, during unit use and/or maintenance,
following safety instructions must be heed. Before using the unit, please read these instructions.
Follow all instructions and keep this instruction manual.
- Be careful that unit operation may not cause damage to people.
- Place the unit in a location protected from weather and far from water and moisture.
- Don’t place this unit close to heat sources (radiators, spots, amplifiers etc.).
- Avoid any liquid entering inside the unit.
Connect this unit to a power supply line able to support unit power consumption, checking power supply line
good operating conditions.
- Be careful that power supply line has an efficient ground line.
- Disconnect the unit from a. c. power socket during lighting storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as:
- Detective connections and/or on connections cables.
- Liquid has spilled inside the unit.
- The unit has fallen or has been damager or doesn’t operate normally.
No user-serviceable parts inside. Refer servicing to an authorized maintenance centre.
Proel Sound Processor units comply with EMC Directive 89/336/CEE (Directive on approximation of member
nation’s ordinance concerning the electromagnetic compatibility) and following modifications 92/31/CEE and
93/68/CEE, as stated in EN 50082-1:1997, EN 55013:1990, EN 55020:1994 standards. These units comply
to Low Voltage Directive 73/23/EEC (Directive on approximation of member nation’s ordinance concerning
electric equipment designed to be used within the specified voltage range), and following modifications
93/68/CEE, as stated in EN 60065:1998 standard.
To avoid electric shock don’t open this unit. To prevent risks of fire and/or electric shock, don’t expose this
unit to rain or moisture.
PACKAGING
This unit package has been submitted to ISTA 1A integrity tests. We suggest you control the unit conditions
immediately after unpacking it. If any damage is found, immediately advise the dealer. Keep all unit
packaging parts to allow inspection. Proel is not responsible for any damage that occurs during shipment.
SHIPMENT AND COMPLAINT
Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
Possible damages to unit should be immediately notified to forwarder. Each complaint for manumitted
package should be done within eight days from product receipt.
WARRANTY AND PRODUCTS RETURN
Proel Sound Processor products have operating warranty and comply their specifications, as stated by
manufacturer. Proel warrants all materials, workmanship and proper operation of this product for a period of
two years from the original date of purchase. If any defects are found in the materials or workmanship or if
the product fails to function properly during the applicable warranty period, the owner should inform about
these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect
detailed description. This warranty does not extend to damage resulting from improper installation, misuse,
neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly
used and warranty is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for
any "direct damage" or "indirect damage" caused by product defectiveness.
INSTALLATION
Product installation is in professional 19” standard rack.
DISCLAIMER
Proel Sound Processor products have been expressly designed for audio application, with signals in audio
range (20 Hz to 20 kHz). Proel has no liability for damages caused in case of lack of maintenance,
modifications, improper use or improper installation non-applying safety instructions.
POWER SUPPLY
Do not defeat the purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wider blade
and the third prong are provided for your safety. When the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet. Only use this equipment with an appropriate mains
cord. In the USA the cord should comply with the requirements contained in the Standard for Cord Sets and
Power Supply Cords, UL 817, be marked VW-1, and have an amp capacity rating not less than the marked
rating of the apparatus.
Proel S.p.A. reserves the right to change these specifications at any time without notice.