DSO26 User Manual
12
DSO26 CONFIGURATIONS
Introduction
To simplify the set-up of the DSO26, 5 crossover modes are selectable from the X-over
sub-menu. These all have parametric equalisers, high and low pass filters, gain controls,
delay and limiters. The following set of diagrams detail how each of the five modes is
internally configured. Note that the 2 x 3 way and 3 x 2 way modes also offer the option of
ganged parameter adjustment for stereo systems.
2 x 2 way with Mono Sum
This format feeds input A to outputs 1 and 2, designated low and high respectively. Input
B feeds outputs 3 and 4, low and high respectively. Outputs 5 and 6 are both fed from the
sum of inputs A and B. Output 6 is a full bandwidth output by default, with output 5 being
bandwidth limited as a sub output.
AES/EBU Digital input and output interfaces are available as an option (factory fitted only).
Input and output balancing transformers are also available as an option (factory fitted only).
Summary of Contents for AXIOM DSO26
Page 49: ......
