REAR PANEL
fig.2
4. INSTALLATION
Note
•
To allow a normal cooling for the rear part, install the unit in an
ambient with good ventilation and distant from heat sources. Avoid
direct exposition to sun .
•
Do not install the unit in ambient with vibration risks .
•
When the power amplifier is installed in a rack, ensure that this
rack is complying with EN 60439-1 standard and that the
ventilation of rear rack panel is perfect .
The unit is supplied with rubber feet to ensure a good plan stability .
5. CONNECTIONS
Attention
•
For connections revert to authorized installer to avoid to damage
the unit .
•
Plug to the main AC power before ON status selection and unplug
after OFF status selection
