background image

 

 

Sentences preceded by 

 symbol contain important safety instruction. Please read it carefully. 

 
 

DETAILED SAFETY INSTRUCTIONS. 

 
Water and moisture: 

This apparatus should not be used near water (i.e. bathtub, kitchen sink, swimming pools, 
etc.) 

 

Ventilation

This apparatus should be placed in position that doesn’t interfere with correct ventilation. This 
unit, for example, should not be placed on a bed, sofa cover o similar surfaces that could 
cover ventilation openings, or placed in a built-in installation, such a bookcase or a cabinet 
that could block air flow trough ventilation openings. 

 

Heat:  

This apparatus should be placed away from heat sources, like radiators, heat registers, stoves 
or other products (including amplifiers) that produce heat. 

 

Power sources: 

• 

This apparatus should be connected only to power source type specified in this owner’s 
manual or on the unit. 

• 

If the supplied AC power cable plug is different from wall socket, please contact an 
electrician to change the AC power plug. 

 

Grounding or Polarization: 

• 

All precautions must be observed in order to avoid grounding or polarization defeating. 

• 

Unit metal parts are grounded through the AC power cord.  

• 

If the AC power outlet doesn’t have grounding, consult an electrician for outlet grounding. 

 

Power cord protection: 

The power cord should be routed in a way it will not be walked on or pinched by items placed 
upon or against it, paying particular attention to cords at plugs, convenience receptacles and 
wall outlet. 

 

Cleaning: 

• 

You can clean the unit with a compressed air flow or a wet cloth.  

• 

Don’t clean the unit using solvents like trichloroethylene, thinners, alcohol, or other fluids 
with very strong volatility and flammability. 

 

Non use periods: 

The unit AC power cord should be unplugged from the outlet if it’s unused for a long period. 

 
 
 
 
 
 

Summary of Contents for APW1000













Reviews: