Need Help? Call Assembly Support at 800.318.2770
1. Using three (3) 8-32 x 3/8” nuts and bolts, assemble
Upper and Lower Side Brackets as shown for right and left
brackets, according to your style of workstation.Set aside
until step 4.
a. For C-Leg & Easy-Lift Dual-Leg workstations,
assemble brackets so that the Upper and Lower Side
Brackets are flush against each other.
b. For RTW, Easy-Lift 4-Post or PedSys workstations,
assemble brackets so that the Lower Side Brackets
extend below the Upper Side Brackets.
2. Choose right or left side for mouse tray. Using two (2) 8-32
x 3/8” bolts, hex nuts and washers, install the mouse pad
bracket onto the keyboard tray under the back lip of the
wrist rest. Slide the tray onto the bracket and repeat for the
rear mouse pad bracket with tray in place. The mouse tray
should slide freely. A lip on the tray acts as a stop.
3. Attach adhesive backed cable clip to back of keyboard tray.
These hold your mouse and keyboard wires in place.
4. Slide keyboard onto left and right side brackets as shown.
5. For C-Leg and Easy-Lift workstations insert a Basic Bolt
through the two (2) large holes on top of each bracket from
step 1. Secure with a Basic Nut. Turn one revolution.
a. For RTW, use wood screws to attach to underside of
worksurface. Go to Step 6.
6. Position the keyboard under the workstation. Insert the
Basic Nuts attached to the bracket into the Worksurface
Support Rail and tighten the bolts.
P A R T S A N D H A R D W A R E
Q U A N T I T Y
Upper Side Bracket
2
Lower Side Bracket
2
Basic Bolts
4
Basic Nuts
4
Keyboard Drawer
1
Cable Clip
2
Mouse Pad Bracket
2
Mouse Tray
1
8-32 Bolts
10
8-32 Nuts
10
Wood Screws
6
3/32 Allen Wrench
1
Other Items Needed (not included)
Phillips head drill
KEYBOARD DRAWER
item Number 8681
Upper side Bracket- C-leg/Easy-Lift Dual Leg, left side
Lower Side Bracket C-Leg/EasyLift Dual Leg, right side
Upper side Bracket- RTW/Easy-Lift 4-Post, left side
Lower Side Bracket RTW/Easy-Lift 4-Post, PedSys, left side
Cable Clip
Mouse Tray
Completed Keyboard Drawer for
C-Leg/Easy Lift Dual Leg
See Step 4a for RTW Table,
Easy-Lift 4-post, PedSys
Wrist Rest
Rear Mouse Pad Bracket
Mouse Pad Bracket
Step 1a
Step 1b
Steps 2-3
Steps 4-6
ASSEMBLY VIDEOS AVAILABLE ON-LINE http://video.pbasics.com
1602A101
18