Operating Manual ProDevice ASM120 PPMS USER
ASM120
www.prodevice.eu
17
•
Cycle interrupted by open tray
–
the device detected that the tray
was opened when the capacitors were being charged; access level:
Customer.
•
Cycle interrupted by power off
–
the device detected that the power
was turned off when the capacitors were being charged; an additional
parameter stores the timestamp of the power outage; access level:
Customer.
•
Inspection required
–
the device reports that the periodic inspection is
necessary; access level: Customer.
•
Inspection acknowledgement
–
the device received the command to
set the inspection counter; an additional parameter stores the new
inspection counter value; access level: Customer.
•
Cycle
–
the device recorded a full cycle; an additional parameter stores
the information about the triggered magnetic pulse peak value; access
level: Customer.
•
No pulse
–
the device did not record the magnetic pulse despite the
trigger
–
servicing is required; access level: Customer.
•
Set the non-erasable counter
–
the device received the command to
set the non-erasable counter; this resets all other counters; access
level: Guarantor.
•
Cycle interrupted by high temperature
–
the device detected
overtemperature and stopped working; access level: Customer.
•
Set MAC address
–
the device received the command to change the
MAC address; an additional parameter stores the new MAC address;
access level: Service.
•
Set RTC
–
the device received the command to change the date and
time; an additional parameters stores the new date and time; access
level: Customer.
The report generated from the data read from the device can be saved
to an encrypted binary file. The diagnostic file generated by the device
Administrator is also encrypted.
The report generated from the device performance also includes
information about the completed removal cycles. The specific columns of the
