Proctor PRT 3004, User Manual

Page: 52 / 144

Standalone DVR
4 7
Page:
User Manual Ver. 2.2
Event setup
NOTE : you have to set it as ‘ Even recording’ at ‘ Schedule record setup’ to use this function.
NOTE : you have to set it as ‘ Even recording’ at ‘ Schedule record setup’ to use this function.
Motion
detection area
Event Setup - Motion
sensitivity – select a level of detection sensitivity.
level of sensitivity : 0 < 1 < 2 < … .. < 9
Alarm out – activate alarm on motion detection.
Motion area – select detecting area.
(1 ) all – detect the whole camera screen.
(2) part – detect motion detection area.
(3 ) off – no motion detection.
W hen the event (sensor/motion/video loss) is detected on DVR side, DVR alerts by message
pop- up, beep sound or E- mail notification. Y ou must setup event recording on schedule record
setup to use this function.