5
If Heating Element Discolors
It is normal for stainless steel heating elements to discolor.
This does not affect the performance of the kettle. Do not use
abrasive scouring pads or cleaners as this may damage the
stainless steel surface.
If Your Kettle Boils Dry
If your kettle is accidentally switched on without being filled
with water, or is allowed to boil dry, the kettle will cycle con-
tinuously, switching off, cooling down and switching back on.
You should:
1.
Turn the kettle OFF, unplug the kettle and wait about
15 minutes for the element to cool down.
2.
Refill the kettle, then use as normal and check that the
kettle functions correctly.
If Your Kettle Does Not Work
Make these simple checks before calling the toll-free cus-
tomer assistance number:
• Have you switched the power switch button to ON position?
• If the kettle heats but does not boil, it might need descaling.
• Has the kettle been accidentally switched on without being
filled with water or allowed to boil dry? Turn the kettle OFF,
wait 15 minutes and try again.
• Is the kettle cord firmly plugged in the outlet?
Using Your Electric Kettle
BEFORE FIRST USE:
Fill kettle to MAX indicator on water
level window and bring to a boil. Discard water and repeat.
Rinse out kettle 2 or 3 times. The kettle is now ready for use.
1.
Unplug kettle from outlet before filling.
2.
Fill kettle with required amount of water. Ensure that water
level is between MIN and MAX on the water level indicator.
WARNING:
If kettle is overfilled there is a risk that boiling
water may spit out of the spout.
3.
Make sure that lid is in place and kettle is standing on a level
surface. Using the kettle without the lid is not recommended.
4.
Plug into outlet and turn on. The lighted power switch will
glow.
5.
When the water has boiled, turn the kettle off. (Remember,
the surface of the kettle gets hot; take care–only grip the
kettle by the handle).
6.
After use, unplug kettle and empty.
NOTE:
Use water only in the kettle. If used for foods or bever-
age such as tea or coffee, the warranty will be voided.
4
Parts and Features
1. Lid
2. Lighted Power Switch
840147100 ENv00.qxd 2/10/06 1:26 PM Page 4