4/24
2017/04 - Indice de révision : A - Code : 37411
If you want to add an additional means of access to your TROPIC JUNIOR pool (steps, ladder), choose
one that can be «locked»(to prevent access while the pools is not use), failing this move the means of
access away from the pool
Only use the original filtration system, never try to adapt any other filtration system to your TROPIC JUNIOR
pool. This could create a risk of entrapment of bathers due to the pump’s suction force
Do not allow your children to climb on, or sit on, the filter. Electrical hazards:
•
The filter power supply must be more than 3.5 m from the pool
•
Check the power cable and the cable between the filter and the power supply regularly for damage,
and replace them immediately if they are damaged (cut, pinched, worn, etc.)
•
Never submerge the filter transformer in water
•
Never bring a device powered by a voltage greater than 12 V closer than 3.5 m to the pool. For
installations outside France, refer to the regulations in effect in the country of installation.
Educate your children about the dangers of disregarding safety rules.
4.
PREPARATION
4.1
TROPIC JUNIOR packaging and storage
4.1.1 Package no. 1 (box)
Dimensions: 0.4 m x 0.4 m x 0.6 m
Weight:
10 Kg
Content:
•
Liner
•
Filter
•
Screws
•
Fastening components
•
Underlay
•
Installation instructions
•
Wood stabiliser to
prevent cracking and
splitting
4.1.2 Package No. 2 (pallet)
Dimensions:
2.30 m x 0.61 m x 0.45 m
Weight:
150 kg
Content:
•
Wooden structure
•
Liner locking track profiles
CAUTION
The wooden parts are trapped together. Do not undo the straps until you are ready to build the structure.
Before assembly, the pallet must be stored sheltered from rain and sun. 48 h before assembly, cut the ties
holding the wooden slats and coping together and allow them to dry, without exposing them to direct sun
light. This will facilitate assembly.
