31/48
2009/01 - Indice de révision : C - Code : 0033385
* Each fan is fitted with a single phase motor 50 Hz 230V
Be very careful not to hinder or block the air flow.
To ensure that the air can flow freely, minimum distances (see the figures below) must be respected between the
various sides of the machine and the obstacles surrounding it (partitions, walls, hedges, etc.):
The heat pump must be installed and solidly attached to a rigid support (concrete slab, etc), the dimensions of which
must at least be equal to the footprint of the machine.
To attenuate any vibrations, “silent-blocks” can be inserted under the feet of the machine before is it fixed in position.
The support should be
very slightly sloped
(a slope of 1 to 2% will suffice)
towards the corner where the conden-
sate drainage hole is situated,
condensates will drip from the bottom of the machine (under the part containing the
electronics).
The condensate drain union supplied with the heat pump can be clipped into the drainage hole under the machine.
HC-HH series CLIMEXEL heat pumps draw ambient air in through the evaporator and expel air out through the fan
grill(s). The nominal air flow rates are as follows :
HC-HH 62 M
HC-HH 72 M
HC-HH 92 M
HC-HH 102 M
HC-HH 102 T
HC-HH 122 M
HC-HH 122 T
HC-HH 152 M
HC-HH 152 T
HC-HH 172 T
Number of fans*
1
1
1
1
2
2
2
Nominal air flow
rate
(m3/h)
700
2200
3100
3100
4400
6200
6200
Fan motor
technical data
(Rotations/
mn-kW-A)
850
0.132
0.94
850
0.17
0.76
850
0.17
0.76
850
0.17
0.76
850
0.17
0.76
850
0.17
0.76
850
0.17
0.76
HC-HH 62 M HC-HH 72 M HC-HH 92 M
HC-HH 102 M
HC-HH 102 T
HC-HH 122 M
HC-HH 122 T
HC-HH 152 M
HC-HH 152 T
HC-HH 172 T
Weight (kg)
59
95
108
118
129
140
143
Dimensions
(Width x
depth
x height)
820x280x590
905x405x762
905x405x965
905x405x965
905x405x1270 905x405x1270 905x405x1270
