29/32
2009/10 - Indice de révision : I - Code : 0035001
ASSEMBLY OF THE BEARING AND REDUCTION GEAR
Using the two HSHC 6 x 16 mm screws, mount the
2 flanges on the reduction gear.
Peel the protective backing paper of the adhesive
seal.
Stick the adhesive seal to the bearing.
Adhesive seal
Bearing
Ring
HSHC screw 6 x16
Reduction gear
Flange
Washer Z 8
HSHC screw 8 x 35
Push the ring into the bearing.