24
4. Set top base panel on the ground, with the surface marked 1 upward. Set connectors in
seven screwed holes in the top base panel (Note: Be sure to fasten the connectors tightly),
See FIG (f)
.
5. Piece together the assembled structure and front base panel marked 4. Note: Insert the
connectors on the front base panel in the seven corresponding holes of assembled struc-
ture-see FIG (g). Then screw down the connectors using Philips screwdriver, see FIG (h).
Assemble Base to Mantel
Push base finished in step 5 to mantel to complete the whole installation procedure,
see FIG(i).
FIG (f)
Connector
Fastener
FIG (g)
FIG (h)
FIG (i)
Connector
Base
