Prochem LEGEND GT Operating Instructions Manual Download Page 136 | Manualshive

Page: 136 / 137

background image

Kärcher North America
Truckmount Warranty

Effective on all products shipped

AFTER

September 1, 2016

Kärcher

North America

reserves the right to change its warranty policy without notice.

Kärcher

North America

• 1351 West Stanford Avenue • Englewood, CO 80110 USA

Tel 800-444-7654 • Financial Service 800-804-6804 • Fax 866-271-0520 •To register, email:

[email protected]

For warranty questions, email:

[email protected]

86039920 REV L

Component

Coverage

Responsibility

Warranty

Engine

Engine

Dependent:

Briggs

&

Stratton

–

1.800.233.3723

2

years

Kohler

–

1.800.544.2444

2

years

Kubota

‐

1.847.955.2500

2

years

Hyundai

Engine

www.zenithpp.com/

1.276.525.4760

2

years

or

2000

hours

Zenith

EFI

Emissions

Monday

‐

Thursday

1.276.645.8679

Friday

only

1.276.477.0653

3

Years

or

2500

hours

*The

servicing

dealer

must

contact

engine

manufacturer

prior

to

performing

service.

This Warranty Shall Not Apply To:

1. Any product that has been subject to abuse, misuse, neglect or unauthorized alteration (including the use of incompatible or

corrosive chemicals or overloading of capacity).

2.  Products that have experienced shipping or freight damage.
3.  Repairs necessary to correct any failure due to improper pre-delivery service and inspection by the selling dealer.
4.  Excessive time for cleaning units in preparation for repair.
5.  Any repairs resulting from poor initial service work or improper diagnosis.
6.  Tune-up parts such as plugs, plug wires and condensers.
7.  Any design alterations performed by an organization not authorized or specified by Prochem Kärcher Group.
8. High-pressure

washing.

9. Electrical components exposed to moisture.
10. Battery does not carry warranty coverage.

If difficulty develops during the warranty period, contact the authorized agent from whom the product was purchased. Kärcher North
America

may elect to require the return of components to validate a claim. Any defective part to be returned must be shipped freight

prepaid to Returns department.

Use of Parts Not Approved By Kärcher North America Will Void All Warranties

This warranty is valid only for all products Shipped/Sold

AFTER

September 1, 2016. A product sold before that date shall be covered

by the limited warranty in effect at the date of sale to the original purchaser.

«
...
134
135
136
137
»

Summary of Contents for LEGEND GT










































































































































Reviews:

No comments

Related manuals for LEGEND GT

Brand: b-mola Pages: 9

Brand: Galaxie Pages: 32

Brand: Nederman Pages: 89

Brand: Neato Robotics Pages: 16

PowerForce 6583 Series

Brand: Bissell Pages: 16

Brand: Westinghouse Pages: 12

AutoVac Luna Pro

Brand: iHome Pages: 25

Brand: NateoSante Pages: 52

Auto-Mate® Corded Hand Vacuum

Brand: Bissell Pages: 8

Brand: Kogan Pages: 12

Brand: Tapo Pages: 24

Brand: Kiwi Pages: 28

Brand: Linea Pages: 48

Brand: Dyson Pages: 84

Brand: Norton Pages: 17

KLEENJET PRO PLUS 300CS

Brand: Daimer Pages: 40

Brand: Roller Pages: 56

Brand: Gaggia Pages: 43

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands