MCT466-QC User Guide Manual
Process Sensors Corporation
Page 26
FunctAtro (Dry):
This sets the MCT466-QC NIR tester to readout in moisture computed on a dry
weight basis.
Algorithm (Log):
This sets the MCT466-QC NIR tester to readout using a logarithmic calculation.
Lin Mode:
This changes the linear regression calibration to a “look up” table calibration.
4-
Constants Engineering Page:
The constants page shown in Figure 28 below displays the current algorithm of the MCT466-QC NIR
tester. This page is used to change the NIR tester’s algorithm for all constituents measured.
Figure 28:
Engineering Menu – Constants Page
