MCT466-QC User Guide Manual
Process Sensors Corporation
Page 15
3.2.6
Calibration Parameters
By touching the calibration parameters button, shown in Figure 13 above, you will
access
the
Select Cal page (shown in Figure 15 below). The display will present the product calibrations saved
in the NIR tester.
You can simply select the
product calibration by touching it. Touch the right arrow on the top
right corner to see the calibration parameters for the product being used as shown in Figure
16
below. Adding a new product is made by touching the NEW blue button.
Figure 15:
Calibration Parameters Page 1
Figure 16:
Calibration Parameters Page 2
