7.3 On-line Menu
The user may make changes to the response time of the sensor and to the zero setting of the selected
Calibration Channel directly from the ‘Home” screen.
When at the ‘home’ screen, pressing the RIGHT arrow will display the Damping Time currently being
used by the sensor.
Press the RIGHT arrow to set the cursor under the digits use the UP/DOWN keys to set the desired
value. Press ENTER to confirm the selection.
From the Damping display press the DOWN arrow to access the Sample Value Trim screen.
This screen allows the sensors reading to be adjusted to agree with the known moisture content of the
sample it is viewing.
Use the RIGHT key to move the cursor under the digits, use the UP/DOWN keys to set the desired
value. Press Enter to confirm the value.
HOME Screen
Moisture: 5.1% 01
Prod.: Prod A (01)
Moisture: 5.1% 01
Damping: 1
Moisture = 5.1% 01
Sample Val: 0.0
15