Page 39
GPS Precision:
12 (default)
Convert to old Format:
Converts measurement files to old format
See chapter 9
“Data analysis” on page 59.
5.8.3 Event button configuration
The buttons
underneath the bar diagram in the measuring window are called “Event
Buttons”, see chapter 5.4.1 on page 27. They store predefined texts in the
measuring file when pressed during a measurement. The event buttons can be
named individually, e.g. “Roadwork” or “Wet marking”.
The first three buttons have a punctual setup which means the event will only be
written once into the measuring file when pressed. The other seven buttons have a
linear setup which means the event will be written in the measuring file as long as
the button is activated.
Click on “Event Buttons Configuration” in the settings window to open the event
button configuration window:
Short Text:
Caption on the button
Long Text:
Text written in measuring file
Visible:
Button visible/invisible
Save button:
Save changes
5.8.4 Camera settings
The behaviour of the camera can be set with the camera settings, click on “Camera
Settings“ to open the camera settings window:
