background image

 

ZCC2087 - Manual 

 

 

 

24. August 2021 

 

© Copyright 2021, PROCEQ SA

 

1  Important Information 

1.1  Exclusion of liability 

The content of this document is intellectual property of Proceq SA. 
Illustrations, descriptions as well as the technical specifications conform to the instruction 
manual on hand at the time of publishing or printing. However, Proceq SA is one of 
continuous product development. All changes resulting from technical progress, modified 
construction or similar are reserved without obligation for Zehntner to update. 
Some of the images shown in this instruction manual may be of a pre-production model 
and/or are computer generated. Therefore, the design / features of the delivered product 
may differ in various aspects.  
The instruction manual has been drafted with the utmost care. Nevertheless, errors cannot 
be entirely excluded. The manufacturer will not be liable for errors in this instruction manual 
or for damages resulting from any errors. 

1.2  Damages during transport 

On receipt of the goods, check for any visible damages on the packaging. If it is undamaged 
you may sign the receipt of the goods. If you do suspect by visual inspection that damage 
has occurred, make a note of the visible damage on the delivery receipt and request the 
courier to countersign it. Moreover, the courier service must be held responsible for the 
damage in writing. 
 
If a hidden damage is discovered while unpacking, you have to inform and hold the courier 

liable immediately in the following way: “When opening the parcel we had to notice that … 
etc.“ This superficial checking of the goods has to be done within the time limit set by the 

carrier, which is normally 7 days. However, the period could vary depending on the courier. 
Hence, it is recommended to check the exact time limit when receiving the goods. 
 
If there are any damages also inform your authorized dealer or 

Proceq SA

 immediately. 

 

1.3  Shipment 

Should the device be transported again, it must be packaged properly. Preferably use the 
original packaging for later shipments. Additionally use filling material in the package to 
protect the device from any shock during carriage. 
 

 

Summary of Contents for ZCC 2087 Series
























Reviews: