Specifications
DA05-DSP
DA06-DSP
General
Number of channels (not bridgable)
2
Maximum total output power
1200 W
2400W
Output voltage
70 v peak / 50 Vrms / 36.2 dBu
100 V peak / 70 Vrms / 39.2 dBu
Output current
16 Arms
20 Arms
Max. Output Power (all ch.’s driven)
2 ohms
500 W
800 W
4 ohms
600 W
1200 W
8 ohms
300 W
600 W
16 ohms
150 W
300 W
Performance
THD+N 20 Hz - 20 kHz @ 1 W
<0.1%
THD+N @ 1 kHz, 1 dB below clip
<0.05%
Output noise -
66 dBu
Signal To Noise Ratio
102 dB
105 dB
Channel separation @ 1 kHz
>80 dB
Frequency response (-3 dB)
2 Hz - 42 kHz
Input impedance
18 kOhm
Common Mode Rejection (CMR)
>50 dB
Output impedance
25 mOhm
Input sensitivity for maximum output voltage
6 dBu
Maximum analog input level
20 dBu
Gain (all DSP controls set to 0 dB)
30.2 dB
33.2 dB
Mains power
Nominal mains voltage
Operating mains voltage
Standby consumption
<6.5 W
<7.5 W
Mains connector
100 - 240 VAC
60 - 265 VAC
Locking IEC inlet
Physical
Dimensions W x H
W: 483 mm (19" ), H: 44 mm (1 U)
Depth (Rack rail - rear panel)
272 mm (10.7" )
359 mm (14.1" )
Depth (over all incl. handles & rear support)
344 mm (13.5" )
431 mm (17.0" )
Weight
4.6 kg (10.1 lbs)
6.2 kg (13.7 lbs)
Finish
Black, anodized aluminium front
panel. Black/gray steel chassis.
Connectors
Analog input connectors per channel
Analog input link connectors per channel
AES input connector
AES input link connector
Output connectors per channel
Network connector
3-pin XLR female
3-pin XLR male
3-pin XLR female
3-pin XLR male
Neutrik speakON / Binding posts,
electronically balanced
RJ45 (Ethernet)
Approvals
CE, UL (ANSI/UL, CAN/CSA), PSE,
RCM, CCC, FCC.
All specifications are subject to change without notice.
5
