Probuilder 43649, Instruction Manual

Page: 117 / 133

117
GB
Tip and Pressure Selection
See table for recommended spray pressure for your material. Refer to paint (material) can for
manufacturer’s recommendations.
Maximum tip hole sizes supported by the sprayer: 0.019 in. (0.48 mm)
Coatings
Interior
Stains/
Interior &
Exterior
Clears
Exterior Solid
Stains
Primers Interior Latex
Paints
Exterior Latex
Paints
Spray
Pressure
Low Spray High Spray High spray High Spray High Spray
Tip hole
Size
0.011 in.
(0.28 mm)
X
0.013 in.
(0.33 mm)
X X X X
0.015 in.
(0.38 mm)
X X X X
0.017 in.
(0.43 mm)
X X X
0.019 in.
(0.48 mm)
X
Spray Techniques
Use a piece of scrap cardboard to practice
these basic spraying techniques before you
begin spraying the surface.
• Hold gun 12 in. (30 cm) from surface
and aim straight at surface. Tilting gun
to direct spray angle causes an uneven
� nish.
• Flex wrist to keep gun pointed straight.
Fanning gun to direct spray at angle
causes uneven � nish.
Even � nish Thin Thick Thin