![Probuilder 43649 Instruction Manual Download Page 111](http://html1.mh-extra.com/html/probuilder/43649/43649_instruction-manual_1608491111.webp)
111
GB
Reminding Tips:
1. Clean the pump / hose / spray gun /
spray tip throughly everyday when you
� nish your painting job.
2. When pump is stored with non-freezing
� uid. Pump damage will occur if water or
latex paint freezes in pump.
3. Damage to plastic parts may result
if impact occurs in low temperature
conditions.
Changes in paint viscosity at very low or
very high temperatures can aff ect sprayer
performance.
Setup
When unpacking sprayer for the � rst time
or after long term storage perform setup
procedure.
Assemble Your Sprayer
1. Connect hose to � uid outlet. Use wrench
to tighten securely.
2. Connect other end of hose to gun.
3. Use two wrenches to tighten securely.
If hose is already connected, make sure
connections are tight.
4. Engage trigger lock.
5. Remove tip guard. Be careful tip seal may
fall out when tip guard is removed.
Summary of Contents for 43649
