Installation and Operation
TAS-UNI
V4
12/06/18
8 / 18
4.1.1
Adjustable Adapter for Roof-/Pan Profile
●
With the adjustable adapter
TAS-DP
(2000 mm) any
roof or pan profile can be adjusted (+/- 4 % with scale)
to prepare any roof or pan profiles.
●
Screw the nuts on the inner side at the TAS-DP
≙
slope (%) for roof profile
Figure 2
(see also
Figure A
on following page).
Screw the nuts on the outer side at the TAS-DP
≙
slope (%) for pan profile
Figure 3
(see also
Figure B
on following page).
Figure 1
Figure 2
Figure 3
4.1.2
Adjustment roof profile
Loosen both nuts (2) on the outer side at the TAK-DP.
Figure 1
Adjust the slope (e.g. 1%) with the both nuts (3) on the inner side at the TAK-DP.
Figure 2
Slope (e.g. 1%) is viewable and adjustable on the scale (4) and indicator (5).
Figure 3
1 scale line on the scale (4)
≙
0,5 % slope.
Figure 3
The indicated slope (%) on the scale is only for orientation.
The actually slope (%) must be measured again unconditional on the facing bedding sand!
See Figure
A und A1 on the following pages.
Figure 1
Figure 2
Figure 3
Adapter for roof-/and pan profile
(
2
)
(
3
)
(
3
)
(
4
)
(
5
)