probst HVZ-ECO, Operating Instructions Manual

Page: 71 / 117

Adjustments 21 / 41
51400034 V3 GB
Machine Side
Adjust the gripping depth (machine side) so, that the
steel-lamellas are gripping in the
½
of the stone layer
(see fig. 8).
Example: with stone layer breadth of 800 mm

170 mm
With extremely large stone layers it recommends to
adjust the gripping depth a little lower, so that the steel-
lamellas grip in the lowest range of the stone layer.
Otherwise it exist the danger that the stone layer breaks
out.
Swing crank upwards.
Adjust the gripping depth identical on both sides of the
device (left and right).
Swing crank again downwards and secure it in the same
position (as before).
Fig. 9 Fig. 10
Fig. 7 Fig. 8
½