Oil Change
Drain the engine oil when the engine is warm. Warm oil drains
quickly and completely.
1.
Tilt the machine of its side.
2.
Place a receptable under the casing filler tube hole.
3.
Remove the oil filler cap (1).
4.
Fill up to “high” level using the recommended oil.
5.
Screw the filler cap fully on to avoid the risk of leaks.
Engine oil capacity:
0.6
l
(0.63 US qt) for GXV140.
0.65
l
(0.69 US qt) for GX160K1.
Please dispose of used motor oil and the oil containers in a manner
that is compatible with the environment. We suggest you take used
oil in a sealed container to your local service station for
reclamation.
Do not throw it in the trash or pour it on the ground.
Air Cleaner
A dirty air cleaner will restrict air flow to the carburetor and cause
poor engine performance. Inspect the filter elements each time the
engine is operated. You will need to clean the filter elements more
frequently than usual if you operate the engine in very dusty areas.
NOTE
Operating the engine without air filters, or with damaged filters, will
allow dirt to enter the engine, causing rapid engine wear.
This type of damage is not covered
under warranty.
Inspection
1.
Remove the wing bolt (1). Then
remove the air cleaner cover (2). Be
careful to prevent dirt and debris
from falling into the air cleaner
base (5).
2.
Remove the foam filter (3) element
from the air cleaner cover.
3.
Remove the paper element (4) from
the air cleaner base (5).
4.
Inspect the filter elements. Replace
damaged filters. Clean or replace
dirty filters.
ATTENTION traits de coupes ancrés à un cadre automatique.
Positions : Gauche : 4.1
Haut : 3
20
19
SEALING
WASHER
DRAIN
BOLT
(1)
(1)
(2)
(4)
(5)
(3)
GXV140
(1)
(2)
(4)
(3)
(5)
GXV160K1
Summary of Contents for EASYFILL EF-H
Page 36: ...HONDA Honda 5 5 OHV GXV 160...
