9
PROBRITE.COM
Please call 1-844-507-5651 or email [email protected] for further assistance.
8
Visit
www.probrite.com/install
for installation video tutorials and product support
NOTE:
If photocell (B) is located in an area
under heavy shade the photocell may not
detect enough light and may turn the light
fixture on.
TIP:
To test if the light fixture (A) and pho-
tocell (B) works properly run power to the
fixture and cover the photocell to turn fixture
ON. Shine a light into the photocell to see if
fixture turns OFF.
OPTION 2: SWITCH CONTROLLED
Switch controlled operation enables the light fixture to
turn ON and OFF by flipping a switch that controls the
electricity to the outlet powering the fixture. The light
fixture will not turn ON and OFF automatically, but is
manually controlled.
☐
To enable switch activated operation
remove the clear cap (installed on the
photocell) and put the black cap cover
(DD) provided, to cover the photocell
(B).
☐
To enable dusk-to-dawn operation
make sure the photocell (B) is exposed
to light and is unobstructed.
☐
Ensure the switch powering the outlet
connected to the light fixture is turned
to the ON position and
leave it ON
at
all times to enable dusk-to-dawn func-
tionality to operate automatically.
A
Operation
1
Selecting Dusk-to-Dawn or
Switch-Activated control
OPTION 1: DUSK-TO-DAWN OPERATION
Dusk-to-dawn operation enables the light fixture to automatically turn
ON when dark outside and turn OFF when the sun rises, thus saving you
energy.
A
B
B
DD
C
D
☐
After wiring is complete, secure the
fixture on the extension arm using
the arm mounting bracket (EE) by
tightening the screws and washers
removed earlier, until the arm mounting
bracket (EE) pushes firmly against the
pole.
Wall Mount
Extension Arm Mount
6
Securing the fixture and wiring
☐
Once the fixture is wired, place the
wire guard protection plate (C) on the
arm (D) by tightening the two screws
and washers removed earlier.
Wall Mount
AUTOMATIC
NIGHTTIME ON
DAYTIME OFF
SWITCH
CONTROLLED
Installation (continued)
EE
