4
Install 4 AA alkaline batteries into the transmitter,
following the instructions provided for your radio system.
Turn on your transmitter, making sure the radio is in neutral.
Carefully remove the hatch (scale pilot cockpit).
Install a fully charged 7.2V Ni-MH battery pack into the radio
box. Follow the instructions included with your fast charger to
ensure a safe charge. Plug the battery into the female battery
connector attached to the electronic speed controller.
Section 1: Installation of
the Transmitter Batteries
Section 2: Installation of the
7.2V Ni-MH Battery Pack
Ensure the antenna tube is properly placed through the hull.
It may be necessary to slightly pull the antenna tube out to
make certain the radio range is sufficient.
Section 3: Checking
the Radio System
