background image

Questions, Assistance, and Repairs

Your local hobby store and/or place of purchase 
cannot provide warranty support or repair. Once 
assembly, setup or use of the Product has been 
started, you must contact Horizon directly. This will 
enable Horizon to better answer your questions 
and service you in the event that you may need any 
assistance. For questions or assistance, please direct 
your email to [email protected]
or call 877.504.0233 toll free to speak to a service 
technician.

Inspection or Repairs

If this Product needs to be inspected or repaired, 
please call for a Return Merchandise Authorization 
(RMA). Pack the Product securely using a shipping 
carton. Please note that original boxes may be 
included, but are not designed to withstand the 
rigors of shipping without additional protection. Ship 
via a carrier that provides tracking and insurance 
for lost or damaged parcels, as 

Horizon is not 

responsible for merchandise until it arrives 
and is accepted at our facility

. A Service Repair 

Request is available at www.horizonhobby.com 
on the “Support” tab. If you do not have internet 
access, please include a letter with your complete 
name, street address, email address and phone 
number where you can be reached during business 
days, your RMA number, a list of the included items, 
method of payment for any non-warranty expenses 
and a brief summary of the problem. Your original 
sales receipt must also be included for warranty 
consideration. Be sure your name, address, and 
RMA number are clearly written on the outside of 
the shipping carton.

Warranty Inspection and Repairs

To receive warranty service, you must 
include your original sales receipt

 verifying 

the proof-of-purchase date. Provided warranty 
conditions have been met, your Product will be 
repaired or replaced free of charge. Repair or 
replacement decisions are at the sole discretion of 
Horizon Hobby.

Non-Warranty Repairs

Should your repair not be covered by 
warranty the repair will be completed 
and payment will be required without 
notification or estimate of the expense 
unless the expense exceeds 50% of the retail 
purchase cost.

 By submitting the item for repair 

you are agreeing to payment of the repair without 
notification. Repair estimates are available upon 
request. You must include this request with your 
repair. Non-warranty repair estimates will be billed 
a minimum of ½ hour of labor. In addition you will 
be billed for return freight. Please advise us of your 
preferred method of payment. Horizon accepts 
money orders and cashiers checks, as well as Visa, 
MasterCard, American Express, and Discover cards. 
If you choose to pay by credit card, please include 
your credit card number and expiration date. Any 
repair left unpaid or unclaimed after 90 days will 
be considered abandoned and will be disposed of 
accordingly. 

Please note: non-warranty repair 

is only available on electronics and model 
engines.

Electronics and engines requiring inspection or 
repair should be shipped to the following address:

Horizon Service Center 
4105 Fieldstone Road 
Champaign, Illinois 61822

All other Products requiring warranty inspection or 
repair should be shipped to the following address:

Horizon Product Support 
4105 Fieldstone Road 
Champaign, Illinois 61822

Please call 877-504-0233 with any 

questions or concerns regarding this 

product or warranty.

Limited Warranty & Limits of Liability (cont)

Safety, Precautions, and Warnings

As the user of this product, you are solely 
responsible for operating it in a manner that  
does not endanger yourself and others or result  
in damage to the product or the property  
of others.

Carefully follow the directions and warnings for 
this and any optional support equipment (chargers, 
rechargeable battery packs, etc.) that you use.

This model is controlled by a radio signal that 
is subject to interference from many sources 
outside your control. This interference can cause 
momentary loss of control so it is necessary to 
always keep a safe distance in all directions around 
your model, as this margin will help to avoid 
collisions or injury.

•  Always operate your model in an open area away 

from cars, traffic, or people.

•  Avoid operating your model in the street where 

injury or damage can occur.

•  Never operate the model out into the street or 

populated areas for any reason.

• Never operate your model with low transmitter 
batteries.

•  Carefully follow the directions and warnings for 

this and any optional support equipment (chargers, 
rechargeable battery packs, etc.) that you use.

•  Keep all chemicals, small parts and anything 

electrical out of the reach of children.

•  Moisture causes damage to electronics. Avoid 

water exposure to all equipment not specifically 
designed and protected for this purpose.

Limited Warranty & Limits of Liability (cont)

General Guidelines

It is important that you read and follow this 
instruction manual, along with the JR

®

 XR3i radio 

system manual and the Zenoah

®

 G26 engine 

manual, before you run this exciting boat. Failure 
to read and understand the manual could result 
is personal injury, property damage or permanent 
damage to your boat! It is also important to run 
your boat responsibly. With proper care and 
maintenance, you will be able to proudly enjoy your 
Formula Hydro for many years to come.

This boat has been designed to race in an oval path, 
just like its full scale counterpart. At high speeds 
do not attempt turns to the left, as the boat may 
become unstable. If you have to turn left, do so in a 
large diameter turn and at slow speeds.

When operating the boat, stay clear of people, 
full-scale boats, stationary objects and wildlife. It is 
preferable to operate the Formula Hydro in low 
wake, low wind conditions and in areas free of 
people, wildlife and objects.

Before you operate your model, make sure that 
your frequency is clear. If someone is operating on 
the same frequency, both models could go out of 
control, possibly causing damage to the models or 
to others. Check all of the hardware, manifold, pipe 
and propeller for security before and after each run.

If at any time while operating your model you 
sense any abnormal function, end your operation 
immediately. Do not operate your boat again until 
you are certain the problem has been corrected. 

Always stay clear of the propeller.

Summary of Contents for 1/8-Scale Formula Hydro Unlimited Hydroplane












Reviews: