background image

27

LIMITED

 

LIFETIME WARRANTY

PMI WARRANTS THIS PRODUCT TO BE FREE FROM DEFECTS IN MATERIALS
AND WORKMANSHIP.

PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH
FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4,
1999.

THIS WARRANTY IS EXTENDED ONLY TO ORIGINAL PURCHASER/USER OF OUR
PRODUCTS.

PMI WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTS IN MATERIAL AND
WORKMANSHIP FOR THE LIFETIME OF USE BY ORIGINAL PURCHASER. IF
WITHIN SUCH WARRANTY PERIOD ANY SUCH PRODUCT SHALL BE PROVEN TO
BE DEFECTIVE, SUCH PRODUCT SHALL BE REPAIRED OR REPLACED, AT PMI’S
OPTION. THIS WARRENTY DOES NTO INCLUDE ANY LABOR OR SHIPPING
CHARGES INCURRED IN REPLACEMENT PART INSTALLATION OR REPAIR OF
ANY SUCH PRODUCT. PMI’S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY
UNDER THIS WARRANTY SHALL BE LIMITED TO SUCH REPAIR AND/OR
REPLACEMENT. FOR WARRANTY SERVICE, PLEASE CONTACT THE DEALER
FROM WHOM YOU PURCHASED YOU PMI PRODUCT. IN THE EVENT YOU DO NOT
RECEIVE SATISFACTORY WARRANTY SERVICE, PLEASE WRITE DIRECTL TO PMI
AT THE ADDRESS ON THE BACK PAGE. PROVIDE DEALER’S NAME, ADDRESS,
MODEL NUMBER, DATE OF PURCHASE, INDICATE NATURE OF THE DEFECT AND,
IF THE PRODUCT IS SEARIALIZED, INDICATE THE SERIAL NUMBER.

PMI WILL USE A RETURN AUTHORIZATION. THE DEFECTIVE UNIT OR PARTS
MUST BE RETURNED FOR WARRANTY INSPECTION USING THE SERIAL
NUMBER, WHEN APPLICABLE, AS INDENTIFICATION WITHIN 30 DAYS OF
RETURN AUTHORIZATION DATE. DO NOT RETURN PRODUCTS TO US WITHOUT

Summary of Contents for 0005































Reviews: