background image

18

WARNING

After ANY adjustments, repair or service and BEFORE use, make sure all
attaching
hardware is tightened securely. Otherwise, injury or damage can result.

CAUTION

DO NOT over tighten the hardware attaching to the frame. This could cause
damage
to the frame tubing.

Suggested Maintenance Procedures

1. Before using your wheelchair make sure all the nuts and bolts are tight. Check all the
parts for damage or wear and replace. Check all parts for proper adjustment.

2. The wheels and tires should be checked periodically for cracks and wear, and should
be replaced by a qualified technician if damaged.

3. Periodically adjust the wheel locks in correlation to tire wear. Refer to 

Adjusting

4. Periodically check the front caster and the rear wheel hubs to make sure they are
clean
and free of cracks.

WARNING

When cleaning the rear cane or handgrip areas, use only a clean towel lightly
dampened with cool water. Verify that grips are dry prior to use. The use of soap
or
ammonia based cleaning solutions will result in the handgrips sliding off the cane
assembly. Failure to observe this warning could result in injury to the user or
bystanders.

5. Hand grips should be checked monthly for wear/looseness. Clean if desired.

6. Check the upholstery for sagging, rips or tears.

Summary of Contents for 0005































Reviews: