RS16 FS – Manual v.6.1A
- 13 -
2.3.2
Console serial port
Use NULL modem cable to connect console port.
The console setting is baud rate:
115200
, 8 bits, 1 stop bit, and no parity.
Terminal type:
vt100
Login name:
admin
Default password:
1234
2.3.3
Remote control – secure shell
SSH (secure shell) is required for controllers to remote login. The SSH client
software is available at the following web site:
SSHWinClient WWW:
http://www.ssh.com/
Putty WWW:
http://www.chiark.greenend.org.uk/
Host name:
192.168.10.50
(Please check your DHCP address for this field.)
Login name:
admin
Default password:
1234
2.4 Enclosure
2.4.1 LCM
There are four buttons to control
RS16FS
LCM (LCD Control Module), including:
c
(up),
d
(down),
ESC
(Escape), and
ENT
(Enter).
After booting up the system, the following screen shows management port IP and
model name:
192.168.10.50
RS16FS
←
Press
“ENT”
, the LCM functions
“System Info.”
,
“Alarm Mute”
,
“Reset/Shutdown”
,
“Quick Install”
,
“Volume Wizard”
,
“View IP Setting”
,
Tips
ULTRASTOR RS16 FC
controllers only support SSH for
remote control. For using SSH, the IP address and password
are required for login.
