![background image](http://html1.mh-extra.com/html/proavio/eb400cr/eb400cr_user-manual_1608045017.webp)
16
Configuration Utility 3
This chapter explains how to use and make changes to your EB400CR using the RAID management User Interface
Software.
Configuration Method
Your E50FR can be configured using the supplied configuration utility. The configuration utility supports: Microsoft
Windows, Linux, and Mac OS.
IMPORTANT:
Your EB400CR must be connected to the Host computer in order to configure the
system. The configuration utility will not recognize any disk drives if the EB400CR is not connected
to the Host computer.
NOTE:
At least one disk drive must be installed in the EB400CR before creating a RAID set.
IMPORTANT
: When hard disks are inserted in the disk slots, the first inserted hard disk is
assigned
“
Port 0
”
. Port 0 is the (in-band) channel that will be used by the Configuration Utility to
manage the RAID controller. Other hard disks will be assigned Port1, Port 2, etc. If the first hard
disk assigned as Port 0 is removed, the AP cannot access and manage the RAID controller. When
a RAID Set is already created, the first hard disk that was inserted and assigned Port 0 (whether or
not it is part of the RAID Set) can then be removed and the Configuration Utility can still manage
the RAID controller.
Summary of Contents for EB400CR
