![background image](http://html1.mh-extra.com/html/proavio/eb400cr/eb400cr_user-manual_1608045016.webp)
15
Getting Started 2
This section provides step-by-step on configuring and connecting your EB400CR storage system. Configuration and
setup can be accomplished using the LCD control panel, or the RAID Management GUI software. Using the RAID
Management software provides an intuitive user experience and offers advanced features and control not available
through the LCD control panel.
2.1 Connecting Your EB400CR
Please read this section carefully.
1.
Connect a USB cable, eSATA or IEEE 1394 cable from your EB400CR to the corresponding port on
your workstation.
NOTE:
Only one host connection will work at one time. You cannot use the three data connections (USB3.0,
eSATA, and FireWire800) at the same time. Additional FireWire drives may be
“
daisy-chained
”
or connected in
series. Keep in mind that doing so may degrade RAID performance.
2.
Connect the power cable to the power input socket. Plug the other end of power cable to your
power source.
3.
Turn the Power switch ON.
Summary of Contents for EB400CR
