ProArc PT-502, Owner'S Manual

Page: 4 / 25

i
INSTRUCTION
A procedure, which if not properly followed, may cause injury to the
operator or others in the operating area.
Equipment Identification
Receipt of equipment
The identification number specification or part number, model, and serial
number of this unit usually appear on a nameplate attached to the control
panel; record these numbers for future reference.
When you receive the equipment, check it against the shipping documents.
Make sure it is complete and inspect the equipment for possible damage
during shipping. If there is any damage, notify the carrier immediately to file a
claim.
Furnish complete information concerning damage claims or mistake(s) in
shipment to United ProArc Corporation: No. 3 Gungye 10
th
Road, Pingjen Ind.
Park, Pingjen City, Taoyuan 324, Taiwan. Include the equipment identification
number along with a description of the parts in question.
Move the equipment to the installation site before uncrating the unit. Use care
to avoid damaging the equipment when using bars, hammers, etc. to uncrate
the unit.
WARNING