3
2.1 MAINTENANCE
Routine maintenance
*
After using the machine, make sure to turn off the input main power to
prevent the leakage of the electricity.
*
To make sure the function of the machine could work well for a long time,
please keep clean all around the machine and the switch from the oil
pollution.
*
To make the machine run normally, the control box, the machine and the
table should be kept clean all the time.
*
Check regularly the lubrication of the reducer to extend the lifetime of the
machine.
*
Check cable if damaged or melted due to overheat.
*
Check the contactor, relay and other connectors if loosen or melted.
*
Check every limit switch is fixed or loses function.
*
Give the machine cleaning and the anti-rust maintenance regularly.
*
Change and refill the lubrication of the worm reducer regularly.
Summary of Contents for PT-1000
