PROAQUA 31-5393, Instruction Manual

Page: 8 / 40

8
English
1
2
Inflating the product
1. Spread the product out on a flat surface.
2. The air valve is a screw valve consisting of an inner valve
body and an outer valve cap, the inner valve body contains
a non-return valve. Unscrew the outer valve cap from
the air valve and fill the chamber with air.
3. Only use a foot pump or electric pump designed for
the inflation of floating leisure articles. Never use an
air compressor.
4. Do not over-inflate the product as too high a pressure
could damage it and compromise safety.
5. Screw the outer valve cap back on again. Check that no
air is leaking out.
Deflating the product
1. Unscrew the entire inner valve body of the air valve and
let the air out.
2. Roll the product up to squeeze all the air out.
1
2
Towing attachment
• Use a tow rope of at least 1500 lbs. average tensile strength for pulling a single person
• The tow rope should be at least 50 feet in length, but not exceed 65 feet. Attach your towable
to the tow rope using the quick connect attachment.