PROAQUA 31-5209, Manual

Page: 5 / 24

5
English
Operating instructions
Inflating
1. Spread the boat out on a flat surface.
2. Inflate the boat in the order marked on the valves: 1 – 2 – 3 – 4.
3. Fill the boat’s body by inflating valves 1 and 2.
- First remove the cap (A) from the valve and then inflate.
-
Never use an air compressor for inflation. If your pump’s nozzle is too small, use
the adapter (D) next to the valve.
4. Screw the valve cap (A) back carefully to ensure that no leakage will occur.
5. Inflate floor valves 3 and 4.
-
The boat is properly inflated once the printed inflation scale reaches 10 cm long.
A
B
C
D