6
INSTALLATION AND OPERATING INSTRUCTIONS | WWW.PROAPPLIANCES.COM.AU
D. If the machine becomes clogged and inoperable:
1. Turn the machine off and press the reverse button for a few
seconds then try operating again. Note: The reverse button
works with a ‘pulse’ motion.
2. If the reverse button does not work turn off the machine
and switch off at the power point. Disassemble the unit to
dislodge any material then reassemble as per the instructions
and try again.
E. How to disassemble and clean the unit:
1. Switch off the unit.
2. Twist the hopper anti clockwise then lift off.
(See Fig 9). Lift the bowl straight up to remove from the base.
3. Disassemble the parts from the bowl in the order show by the
diagram. (See Fig 10).
4. Use the brush to clean all of these parts thoroughly in warm
soapy water then dry thoroughly. Ensure the pulp outlet on
the bowl is clear (the end of the cleaning brush is designed to
clear trapped material from the pulp outlet). Unplug the rubber
stopper for easier access to the pulp outlet.
Caution:
Before juicing ensure the rubber stopper is firmly in place.
(See Fig 2, Page 3).
5. Use a damp cloth to wipe down the base of the unit.
Cleaning Tips:
• Periodically remove the silicone brushes from the spinning
brush and clean thoroughly before reassembling.
• Thoroughly clean immediately after each use to minimize staining.
• Pull out the rubber stopper on the base of the bowl to clean
bowl effectively. Always ensure the rubber stopper is re-inserted
prior to juicing otherwise it may cause a leak.
• Do not use harsh abrasives or chemicals to clean the juicer.
• Do not clean in the dishwasher.
1
2
3
4
Fig 10
Fig 9
Remove handle
Summary of Contents for JuicePro ALI-VJP-P3
Page 1: ...ALI VJP S3 ALI VJP P3 WWW PROAPPLIANCES COM AU ...
Page 13: ...INSTALLATION AND OPERATING INSTRUCTIONS WWW PROAPPLIANCES COM AU 11 ...
Page 14: ...12 INSTALLATION AND OPERATING INSTRUCTIONS WWW PROAPPLIANCES COM AU ...
Page 15: ...INSTALLATION AND OPERATING INSTRUCTIONS WWW PROAPPLIANCES COM AU 13 ...