2
Start by unlocking the knob, as shown in the
image. This knob acts as an integrated brake
and helps in locking the movements of the
spring.
Adjust the isolator platform horizontally as per
your,need.
For even more smoothness, you can adjust the
hydraulic dampers via the knob present. The
knob has H & S marked on it. You can rotate
the knob either to its Soft (S) or Hard (H) side
as per the requirements.
After adjusting the platform to the desired
position, lock the knob back.
Vibration Isolator
Setup
The next step is to use a top mount as per your
fluid head requirements, as shown in the
image.
The vibration Isolator accepts camera heads in
various options such as Mitchell, 100mm Bowl,
150mm,Bowl.
Note:
The Vibration Isolator minimizes
vibrations on the X and Y horizontal axis during
abrupt movements and can hold 10-100kg
payloads.
In the case of a Mitchell Slider (not included)
Setup, you can directly mount the vibration
isolator onto the slider as shown in the image.
Then attach your fluid head (not included) to
the isolator.
Note: The vibration isolator has a standard
Mitchell mounting and can be directly mounted
on any other Mitchell gear.
