2
ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE
GEAR!
NEVER LEAVE THE FASTENERS LOOSE
Carefully tighten all the fasteners to prevent breakage to the equipment & any harm to crew. It ensures
protection & stability.
DO NOT FORGET TO SECURE THE DOLLY
Always use Safety Wheels while mounting the dolly in Under
-
Slung or Inclined Mode. Not using it will
severely damage both the camera and equipment.
ALWAYS MOUNT DOLLY ON RIGID TRACK
Prevent the track from sagging by fitting support bracket in the middle. Failing to do so will result in un-
steady footage.
NEVER STRIKE OR PUT METAL OBJECTS ON THE RAILS!
This can cause nicks and dings which will result in trembling movement and image vibration!
BE CAREFUL WHILE MOUNTING TRACKS
Do tighten the knobs on track clamping bracket after putting
-
in the rails. This ensures a secure grip to
your track setup and prevents an irreparable damage.
Attaching the Levelling Legs
•
Insert adjustable leveling legs into the end
feet and tighten the knob to secure it.
Attaching the Track
•
Loosen knobs on the end feet, insert track
rails into them, and re
-
tighten the knobs to
secure the rails.
Safety Hints
•
Slide an extension section in each end to
complete an 8ft run. Next, install and
tighten the screws to secure them.
