7
Attaching the Joystick Controller
Attach 4-pin Power Cable with Joystick
Controller. Then attach other cables of
the motors with long cable.
The Pan Tilt Head circuitry is built entirely into the Joystick Controller. The only requirement is AC
Power pack
(Included)
or Battery Power. The power pack can handle 90-240 volts. Users will need
the appropriate plug adapter for local use.
Install 12 volt DC power (4 pin XLR) in
the socket of Joystick Box.
NOTE
:
Any 12 volt battery may operate
this Pan Tilt Head as long as the
Connector and the #1 Negative pin & #4
Positive pin of Cable meet together.
CAUTION:
Do not use an unregulated power supply! If using a regulated power supply, it must
produce less than 12 volts. More than 24 volts may cause permanent damage.
Attach the 4-pin male connector of
Cable to 4-pin female connector of Head
for Panning & Tilting.
(b)
(a)
