3
•
Push the motor towards your side and pull
the lever to attach the motor to the slider.
•
Screw the fluid head
(Not Included)
onto the
slider's camera mounting plate and detach
the fluid head's quick release plate to mount
the camera.
•
Attach the camera to the fluid head's quick
release plate, tighten the screw with a screw-
driver
(Not Included)
, and mount it on the
fluid head.
•
Now tighten the knob to secure it properly.
NOTE:
Remove the motor by unscrewing the
allen bolt using an allen key to use it manually.
Motor With Slider
Setup
Caution: While performing this step, ensure that your camera plate is mounted onto
the slider.
