PROAIM LV-3WAY-01 Assembly Manual Download Page 2

Page: 2 / 4

3-Way Leveller

Setup



Remove the Castle Ring from the bottom of
the Leveller and mount it on a Mitchell Tripod
Stand

(Not Included),

as shown in the image.



Then tighten back the castle ring by twisting
and using a castle nut wrench.

Safety Hints

ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT SERIOUS DAMAGE TO THE
GEAR!

BE HIGHLY VIGILANT WHILE PLACING

The Leveller must be carefully locked while setting-up on any equipment.

DO NOT FORGET TO SECURE THE EQUIPMENT

The gear must be cautiously protected while mounting on the leveller.

NEVER LEAVE THE KNOBS LOOSE

Always tighten the locking knobs properly for giving additional security to the camera
setup.

FOLLOWING THESE GUIDELINES WILL PROVIDE BETTER SHOTS AND TROUBLE-FREE
OPERATION.

YOU

ADDITIONAL INFORMATION, TECHNICAL

AVAILABLE ‘ONLINE’ BY CONTACTING YOUR SALES REPRESENTATIVE.

Assemble Mitchell Base

Summary of Contents for LV-3WAY-01

Page 1: ...reproduced stored in a retrieval system or transmitted by any form or by any means electronic mechanical photo copying recording or otherwise except as may be expressly permitted by the applicable co...

Page 2: ...HLY VIGILANT WHILE PLACING The Leveller must be carefully locked while setting up on any equipment DO NOT FORGET TO SECURE THE EQUIPMENT The gear must be cautiously protected while mounting on the lev...

Page 3: ...ts properly using an allen key The 3 anti slip levelling knobs provide a tilt angle of up to 20 Loosen any of the knobs to offer steep 20 adjustment You can also tighten the castle ring with the provi...

Page 4: ...costs nor does it cover a product subjected to misuse or accidental damage Warranty repairs are subjected to inspection and evaluation by us Liability We are not liable for damage caused by products...