3
•
Remove the Head plate from the 3
-
piece
head assembly before attaching it to your
camera. You will note a number of mounting
holes that can be used to adapt to various
cameras.
In case you want to avoid or skip using the quick release plate, you can attach the camera directly to the
Head Plate using the following assembly sequence:
The multiple slots on the head and bottom
plates allow you to easily adjust the X & Y
axis for perfect balance. Once achieved,
tighten the knobs to secure. Further
‘
fine
tuning
’
will probably be required.
Head Plate X adjustment
Head Plate Y adjustment
•
Align the camera center of balance to the
mid plate and secure.
•
Center the Head Plate on the camera and
secure it properly. Do not over
-
tighten this
adjustment as it can break the threaded in-
sert.
Place the assembly in line with the center of the stabilizer stalk and tighten the side adjusters as shown.
Further
‘
fine tuning
’
will probably be required.
