2
Attach one part of the docking bracket on the
cart edge and tighten the knob to secure it
appropriately.
The Second part tightens around the flycam
flowline support arm using the two supplied
screws, as shown in the image.
Next, attach both the parts together and
tighten the knob to secure them.
Loosen the screws to increase the length of
the flycam flowline support arm, and then
tighten them securely.
Cart Docking Bracket
Setup
Lastly, if you want to decrease the length of
the flycam flowline support arm, loosen the
screws, adjust the height and tighten them
properly.
